#12078 - Bump Steer Kit

Current Stock:
5.00 LBS
Calculated at Checkout

Our bump steer kit is for the type of person that desires maximum performance from their vehicle. This kit allows you to position the tie rod end above or below the steering arm to minimize bump steer. Drilling the tie rod tapered attachment hole to 5/8" is necessary for installation. We include everything shown in the picture along with instructions.

-All Mustang based FFR kits.

Technical Notes:
The Bump steer kit is designed to be adjusted the same way as a regular Tie Rod End. To adjust the Toe-in of the car, only loosen the inside jam nut and TURN THE INNER TIE ROD. The inner tie rod is a ball pivot and is designed for this. Note, you may need to loosen the outer boot clamp so that the boot does not twist.

Click here to download the installation instructions as a PDF.